Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2000 >> Malibu Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Removal & Installation >> Transaxle Mount Assembly (Side) >> Installation

Transaxle Mount Assembly (Side): Installation

  1. Transfer the rear upper mount to the new mount. Position the mount and start the rear upper bolt into the threads. Install the remaining 3 bolts. Tighten all 4 of the mount bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install the mount through-bolt and tighten to specification. See TORQUE SPECIFICATIONS .
  3. Remove the jackstand and the wood block. Install the left splash shield.
  4. Install the left tire and wheel assembly. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals