Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2000 >> Corvette 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the washer solvent container. Refer to Washer Solvent Container Replacement .
  2. Disconnect the washer solvent level sensor electrical connector.
    Fig 1: Removing Washer Solvent Container & Electrical Connector
    G01732641Courtesy of GENERAL MOTORS CORP.
  3. Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.
    Fig 2: Removing Washer Solvent Level Sensor
    G01732642Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals