Test D: Scan Tool Displays Undefined DTC
- Perform diagnostic system check. See DIAGNOSTIC SYSTEM CHECK . After performing diagnostic system check, go to next step.
- Check scan tool for latest version of software. Update as necessary. After updating scan tool, perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING. If scan tool is okay, go to next step.
- Check scan tool if correct vehicle parameters are selected. Correct as necessary. After correcting vehicle parameters, DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING. If vehicle parameter is correct, go to next step.
- Replace EBCM. After replacing EBCM, DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.