Removal & Installation
WARNING: This page is about a different car, the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, and 1998 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Lift and release retaining clips at rear edge of instrument panel upper trim. Twist counterclockwise about 1/4 turn to remove security system LED and Daytime Running Light (DRL) sensor. Remove instrument panel upper trim.
- Remove RCDLR electrical connector. Unsnap RCDLR from instrument panel upper trim. To install, reverse removal procedure.