Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1999 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System - Removal, Installation & Overhaul) >> Fuel System >> Fuel System Pressure Relief

Fuel System Pressure Relief

WARNING: This page is about a different car, the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, and 1998 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Loosen fuel filler cap to relieve fuel tank pressure. Install Fuel Pressure Gauge (J-34730-1) to fuel pressure connection.
  2. Wrap shop towel around pressure connection when installing fuel pressure gauge to absorb fuel leakage. Place gauge bleed hose into suitable container. Open bleed valve to bleed fuel pressure.
scientia non olet · About Mike's Workshop Manuals