Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1999 >> Cavalier LS, 2.4 T >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Removal & Installation >> Transmitter Battery >> Installation

Transmitter Battery: Installation

  1. Install the battery with the positive (+) side facing down. See Figure . Use one 3-volt CR2032 battery or the equivalent.
  2. Ensure the transmitter case seal is in the proper position.
  3. Align the 2 halves of the transmitter case.
  4. Snap the 2 halves of the transmitter case together.
  5. Test the operation of the transmitter. If the transmitter does not function properly, resynchronization may be necessary. See PROGRAMMING  .
scientia non olet · About Mike's Workshop Manuals