Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1998 >> Forward Control P12 >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - System/Component Tests - 6.5L (P Series)) >> Miscellaneous Pcm Controls >> Relay Location

Relay Location

WARNING: This page is about a different car, the 1997 GMC Vandura, 1997 GMC Forward Control, 1997 Chevrolet Forward Control, and 1997 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
A/C COMPRESSOR CLUTCH RELAY LOCATION

Application Location
"P" Series On Engine Bulkhead Relay Bracket, Under Battery Junction Block
WARNING: Vehicles may be equipped with a PCM using an Electronically Erasable Programmable Read Only Memory (EEPROM). When replacing PCM, the new PCM must be programmed.
NOTE: To help save diagnostic time, ALWAYS check for blown fuses or fusible links before proceeding with any testing. If fuses are blown, locate and repair short circuit before replacing fuses. Ensure all related relay and wire harness connections are clean and tight. Repair as necessary.