Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1998 >> Cavalier Base, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Body Control Modules) >> Removal & Installation >> Body Control Module (BCM) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1999 Buick Regal and 1999 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove left instrument panel insulator. Disconnect BCM electrical connectors. Push BCM up, and pull bottom of BCM away from and out of mounting bracket slot. Remove BCM from vehicle. See Figure . To install, reverse removal procedure.

scientia non olet · About Mike's Workshop Manuals