Removal & Installation
- TCS modulator/motor pack assembly is located in engine compartment, near left strut tower. Turn ignition off. Disconnect motor pack electrical connector. Position shop towel below 4 TCS modulator brake pipe fittings and disconnect brake pipes from TCS modulator. Plug brake pipe openings to prevent fluid loss and contamination.
- Remove bolt attaching TCS modulator/motor pack assembly to mounting bracket. Remove TCS modulator/motor pack assembly from vehicle. If separation of TCS modulator and motor pack is necessary, go to DISASSEMBLY. To install, reverse removal procedure. Bleed brake system. See BLEEDING BRAKE SYSTEM .