Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1996 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Trouble Codes >> DTC P0125 - ECT Excessive Time To Reach Closed Loop >> Diagnostic Procedures

Diagnostic Procedures

  1. Perform On-Board Diagnostic (OBD) System Check. Retrieve and record FREEZE FRAME and/or FAIL RECORDS data for each DTC set. Go to next step.
  2. Allow engine to cool completely. Turn ignition on. Using scan tool, compare ECT and IAT values. If values are close, go to next step. If values are not close, go to DTC P0117.
  3. While reading scan tool, start and warm engine to normal operating temperature. If ECT value rises steadily to greater than 95°F (35°C) within 9 minutes, see DIAGNOSTIC AIDS. If ECT value does not rise as specified, go to next step.
  4. Check coolant level. If coolant level is low, repair cooling system as necessary. If coolant level is okay, go to next step.
  5. Compare actual coolant temperature with scan tool ECT value. If temperatures are close, repair cooling system as necessary. If temperatures are not close, go to next step.
  6. Replace ECT sensor and go to next step.
  7. Using scan tool, select DTC, CLEAR INFO function. Start engine and allow it to reach operating temperature. Using scan tool, select DTC, SPECIFIC function and enter DTC P0125. Operate vehicle within conditions required to set DTC. If scan tool displays RAN AND PASSED, go to next step. If scan tool does not display RAN AND PASSED, return to step 2).
  8. Using scan tool, select Read and Record INFO, REVIEW INFO function. If any undiagnosed DTCs are displayed, diagnose affected DTCs. If no DTCs are displayed, system is okay.
scientia non olet · About Mike's Workshop Manuals