Liftgate Will Not Unlock Using Remote Switch
- Connect test light between Gray wire at liftgate release solenoid connector and ground. Move remote switch to unlock position. If test light glows briefly, go to next step. If test light does not glow, repair open in Gray wire between release solenoid connector and lock/latch module connector.
- Connect self-powered test light between Black wire at liftgate release solenoid connector and ground. If test light does not glow, go to next step. If test light glows, replace liftgate release solenoid.
- Connect self-powered test light between Black wire at liftgate strut switch connector and ground. If test light glows, repair open in Black wire between release solenoid connector and ground splice. If test light does not glow, repair open in Black wire between ground splice and ground connections at right side "D" pillar.