Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1994 >> Corsica Base, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Wheel Alignment Specifications & Procedures) >> Alignment Specifications

Alignment Specifications

WARNING: This page is about a different car, the 1994 Pontiac Grand Am, 1994 Oldsmobile Achieva, and 1994 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS

Application Preferred Range
Camber (1)
Front 0 -0.7 To 0.7
Rear -0.25 -0.85 To 0.35
Caster (1)(2) 1.45 0.45 To 2.45
Toe-In (1)
Front 0 -0.2 To 0.2
Rear 0 -0.35 To 0.35
Toe-In (3)
Front 0 -0.1 To 0.1 (-2.5 To 2.5)
Rear 0 -0.17 To 0.17 (-4 To 4)
(1) Measurement is in degrees.
(2) Left-to-right caster differential must not exceed 1 1/2°.
(3) Measurement is in inches (mm).