Code 79, Transmission Fluid OVERTEMP: Notes

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1993 GMC Yukon, 1993 GMC Vandura Special, 1993 GMC Vandura, 1993 GMC Value Van, and 1993 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.

The transmission fluid temperature sensor, located within the fluid pressure switch assembly, is a thermistor which controls the signal voltage to the PCM. The PCM applies and monitors voltage on circuit No. 1227 to the sensor. When transmission fluid is cold, sensor resistance is high; therefore, the PCM will see high signal voltage.

As the transmission fluid warms, sensor resistance and voltage will drop. At normal transmission operating temperature of 212°F (100°C), voltage will be about 1.5-2.0 volts. If fluid temperature becomes greater than 304°F (150°C) but less than 309°F (154°C) for 15 minutes, Code 79 will set. If fluid temperature becomes greater than 309°F (154°C), Code 58 will also set.

NOTE: Test numbers refer to numbers on diagnostic chart.

Code 58 will set if signal voltage indicates a transmission fluid temperature greater than 309°F (154°C). 2) This test simulates a Code 59.