Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1992 >> Beretta Base, 2.2 4, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Vac Circuit Open Test

Vac Circuit Open Test

If resistance is less than 30 ohms, go to VAC CIRCUIT SHORT TEST  . If resistance is greater than 30 ohms, remove servo connector. Measure resistance between servo terminals "E" and "C". If resistance is greater than 55 ohms, replace servo. If resistance is less than 55 ohms, check for open in circuit No. 402 (Light Green wire) between module terminal "K" and servo terminal "E". Ensure servo terminal "C" connector is grounded.

scientia non olet · About Mike's Workshop Manuals