Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1991 >> Astro Van Cargo Extended, AWD, 4L60/MD8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Wheel Alignment Specifications & Procedures) >> Alignment Specifications >> Van ("G" Series)

Van ("G" Series)

WARNING: This page does not describe the selected car, but rather 35 other vehicles, including the 1992 Pontiac Trans Sport, 1992 Oldsmobile Silhouette, 1992 Oldsmobile Bravada, 1992 GMC Yukon, and 1992 GMC Vandura Special. However, it is still accessible from the selected car via links, so may be relevant.
ALIGNMENT SPECIFICATIONS ("G" SERIES VAN)

Application Preferred Range
Camber (1) 0.5 0-1
Caster (1)(3) 4 3.5-4.5
Toe-In (2) 0 -0.05 to 0.05 (-1.5 to 1.5)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
(3) See CASTER SPECIFICATIONS (VAN)  table.
CASTER SPECIFICATIONS (VAN) (1)

Dimension "A" (In.)  Dimension "A" (MM)  Caster 
1.50 (38.1) 3.4°
1.75 (44.5) 3.2°
2.00 (50.8) 3.0°
2.25 (57.2) 2.0°
2.50 (63.5) 2.7°
2.75 (70.0) 2.5°
3.00 (76.2) 2.3°
3.25 (82.5) 2.2°
3.50 (88.9) 2.0°
3.75 (95.3) 1.8°
4.00 (101.6) 1.7°
4.25 (108.0) 1.5°
4.50 (114.3) 1.4°
4.75 (120.7) 1.3°
5.00 (127.0) 1.2°
5.25 (133.4) 1.1°
5.50 (139.7) 1.0°
5.75 (146.0) 0.9°
6.00 (152.4) 0.08°
(1) Caster varies w/ride height. Measure distance between frame crossmember and lower control arm jounce bracket (Dimension "A"). See Figure.