Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1987 >> Spectrum Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Removal & Installation >> Control Lever Assembly >> Removal

Control Lever Assembly: Removal

  1. Disconnect battery ground cable. Remove glove box. Remove outer blower unit case cover and disconnect fresh air door cable. Disconnect temperature cable at heater valve.
  2. Remove control lever knobs and face plate. Disconnect selector mode cable from assist side of heater unit assembly and remove control lever assembly attaching screws.
  3. Carefully pull control lever assembly away from cluster.
scientia non olet · About Mike's Workshop Manuals