Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1987 >> Forward Control 4.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - System/Component Tests - Gasoline) >> Engine Sensors & Switches >> Engine Controls - System/Component Tests - Gasoline >> A/C ON Switch/System Test

A/C ON Switch/System Test

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 GMC Forward Control. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to RUN position. Move mode selector switch to OFF position. With A/C control assembly connected, measure voltage between mode selector switch Dark Green wire and ground. For wiring schematics, see mini-schematics in A/C CLUTCH under MISCELLANEOUS ECM CONTROLS .
  2. Battery voltage should be present. If battery voltage is present, mode selector switch is operating normally. If battery voltage is not present, check wire from selector switch to fuse for an open circuit. Also check A/C high and low pressure switches for open.
  3. Check voltage between mode selector Dark Green or Dark Green/White wire and ground. Voltage should not be present. If voltage is present, replace mode selector switch.
scientia non olet · About Mike's Workshop Manuals