Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 1987 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Diagnosis & Testing >> Test D - Abs Diode >> Test Procedures

Test Procedures

  1. Measure between terminals No. 1 and 2. Correct reading should be between 0.4-0.6 ohms in forward direction. If not, replace ABS diode.
  2. Reverse probes and measure between same terminals again. Correct reading should be an open condition (infinity). If not, replace ABS diode.
scientia non olet · About Mike's Workshop Manuals