Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2024 >> LYRIQ Tech, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C06FF >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify no other DTCs are set.
    • Go to next step: If no other DTCs are set 
  3. Ignition/Vehicle OFF, disconnect the scan tool from the vehicle, all access doors closed, all vehicle systems OFF, and all keys at least 3 m (9.8 ft) away from vehicle. Allow the vehicle to go into sleep mode.
  4. Ignition ON/Vehicle In Service Mode.
  5. Using a scan tool, clear DTCs.
  6. Verify DTC C06FF is not set.
    • If the DTCs is set 
    1. Perform all necessary programming and setup procedures for the K160 Brake System Control Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the control module.
      • Go to next step: If the DTC does not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  7. All OK
scientia non olet · About Mike's Workshop Manuals