Removal Procedure
- Reposition the inside rearview mirror.
Using a flat bladed plastic trim tool, release the retaining clips.
- Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove
Using a suitable plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover (1) to release it from the windshield.
- Windshield Multifunction Sensor Mount Bracket Cover (1) - Remove
Sunshade Support Bolt (1) - Remove
Roof Console (1) - Remove
- Disconnect the electrical connectors.
Garage Door Opener Transmitter Bolt (1) - Remove [2x]
- Garage Door Opener Transmitter (2) - Remove
- Disconnect the electrical connector.