Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Cellular, Entertainment, And Navigation System) >> Repair Instructions >> Communication Interface Module Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 Cadillac XT6. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5226825Courtesy of GENERAL MOTORS COMPANY

    Communication Interface Module Bracket (1) - Install

  2. GM5226824Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Night Vision Module Bracket Bolt (1) - Install and tighten 2.5 N.m (22 lb in)

  3. Communication Interface Module Bracket Bolt (2) - Install and tighten [ 3x ] 2.5 N.m (22 lb in)
  4. Connect and position the wiring harness.
  5. GM4279825Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster (1) - Install - Instrument Panel Knee Bolster Replacement

  6. GM4280366Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Deflector (3) - Install - Instrument Panel Knee Bolster Deflector Replacement

scientia non olet · About Mike's Workshop Manuals