Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Video Processing Module (2) - Install

CAUTION:

Refer to Fastener Caution .

Video Processing Module Nut (1) - Install and tighten [2x] - Fastener Specifications Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Video Processing Module Bracket (2) - Install
Video Processing Module Bracket Bolt (1) - Install and tighten [3x] - Fastener Specifications Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Vehicle Performance Data Recorder Bracket (3) - Install
Vehicle Performance Data Recorder Bracket Bolt (2) - Install and tighten - Fastener Specifications Fastener Specifications
Vehicle Performance Data Recorder Bracket Nut (1) - Install and tighten [2x] - Fastener Specifications Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Rear Compartment Side Trim-Right Side (2) - Install
Rear Compartment Side Trim Insulator Retainer (1) - Install [4x]
Courtesy of GENERAL MOTORS COMPANY

Rear Compartment Floor Panel Trim (2) - Install
Rear Compartment Floor Stowage Compartment Retainer (1) - Install [3x]
Courtesy of GENERAL MOTORS COMPANY

Rear End Trim Finish Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Rear End Trim Finish Panel Opening Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Rear Compartment Floor Panel Trim (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Cargo Tie Down Loop (3) - Install [2x]
Cargo Tie Down Loop Bolt (2) - Install and tighten [2x] - Fastener Specifications
Cargo Tie Down Loop Bolt Cap (1) - Install [2x]
Perform the necessary programming and setup procedure:Control Module References