Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2021 >> CT4 Luxury, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions >> Repair Instructions >> Throttle Inlet Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

  1. GM5405551Courtesy of GENERAL MOTORS COMPANY

    Clean and inspect O-Ring and apply clean engine oil. Adhesives, Fluids, Lubricants, and Sealers

  2. Throttle Inlet Absolute Pressure Sensor (2) - Install
  3. Throttle Inlet Absolute Pressure Sensor Bolt (1) - Install
  4. Connect the electrical connector.
  5. GM5394953Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner (3) - Install

  6. Front Wheelhouse Liner Retainer (2) - Install [4x]
  7. CAUTION:

    Refer to Fastener Caution .

  8. Front Wheelhouse Liner Screw (1) - Install and tighten [7x] - Fastener Specifications
  9. GM5394822Courtesy of GENERAL MOTORS COMPANY

    Engine Front Splash Shield (3) - Install

  10. Engine Front Splash Shield Bolt (2) - Install and tighten [5x] - Fastener Specifications
  11. Retainer (1) - Install
  12. Install the front wheel and tire assembly. Tire and Wheel Removal and Installation
  13. GM5394936Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Bolt (2) - Install and tighten [2x] - Fastener Specifications

  14. Front Bumper Fascia Air Deflector Screw (1) - Install and tighten [3x] - Fastener Specifications
  15. GM5394612Courtesy of GENERAL MOTORS COMPANY

    Front Tire Front Air Deflector (2) - Install

  16. Front Tire Front Air Deflector Bolt (1) - Install and tighten [4x] - Fastener Specifications
  17. Lower the vehicle.
  18. GM5628891Courtesy of GENERAL MOTORS COMPANY

    Throttle Inlet Absolute Pressure Sensor Bolt (1) - Tighten - Fastener Specifications