Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Driver Assistance Systems) >> Diagnostic Information and Procedures >> DTC B101D (Frontview Camera Module or Frontview Camera - Windshield) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC B101D 3C is not set as current.
    • If DTC B101D 3C is set as current 
    1. Program the B174W Frontview Camera - Windshield.
    2. Operate the vehicle within the Conditions for Running the DTC.
    3. Verify that DTC B101D 3C is not set as current.
      • If DTC B101D 3C is set as current, replace the B174W Frontview Camera - Windshield.
      • Go to next step: If DTC B101D 3C is not set as current
    4. All OK.
    • Go to next step: If DTC B101D 3C is not set as current 
  2. Verify that DTC B101D 34, B101D 35, B101D 36, or B101D 39 is not set as current.
    • If DTC B101D 34, B101D 35, B101D 36, or B101D 39 is set as current 

      Replace the B174W Frontview Camera - Windshield.

    • Go to next step: If DTC B101D 34, B101D 35, B101D 36, or B101D 39 is not set as current 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals