Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (NUG - FWD) >> Installation Procedure

Installation Procedure

  1. GM2205628Courtesy of GENERAL MOTORS COMPANY

    Install a NEW seal (2) and the fuel tank module (1).

  2. GM2817600Courtesy of GENERAL MOTORS COMPANY

    Connect the fuel pump vent hose to the fuel tank fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service .

  3. GM2205627Courtesy of GENERAL MOTORS COMPANY

    Use the CH 45722  wrench by turning clockwise and install the lock ring (1).

  4. GM2205570Courtesy of GENERAL MOTORS COMPANY

    Connect the fuel pump electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .

  5. Install the fuel tank. Refer to Fuel Tank Replacement (FWD) , or Fuel Tank Replacement (AWD) .
scientia non olet · About Mike's Workshop Manuals