Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2019 >> XT5 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P30D2 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC P30D2 is not set.
    • If the DTC is set 
    1. Replace the component: K20 Engine Control Module
    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals