Installation Procedure
WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Battery Positive Junction Block Cable(5) - Install
- Battery Positive Junction Block Cable Fastener (4) - Install and tighten 12 N.m (106 lb in)
- Lower Terminal Cover (3) - Install
- Battery Positive Junction Block Cable Fastener (2) - Install and tighten 12 N.m (106 lb in)
- Upper Terminal Cover (1) - Install
Close the battery fuse block cover.(2)
- Battery Distribution Fuse Block Retaining Tab(1) - Engage
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution