Installation Procedure
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel speed sensor to the suspension knuckle.
- CAUTION:
Refer to Fastener Caution .
Install the wheel speed sensor bolt (1) and tighten to 10 N.m (89 lb in).
Install the wheel speed sensor harness clips (1) to the upper suspension arm.
Install the wheel speed sensor harness clip (1) to the vehicle frame.
Connect the wheel speed sensor electrical connector.
- Install the connector clip (1) to the vehicle frame.
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Perform the Diagnostic System Check - Vehicle .