Approximate Fluid Capacities

Refrigerant System Capacities

Application	Specification
Application	Metric	US English
Abrupt Refrigerant Loss	60 ml¹	2.0 oz¹
Compressor Replacement
NOTE: Compressor failure can occur if the oil removed during refrigerant recovery is not replaced. The service compressor is precharged with one of the following specified amounts of refrigerant oil. Refer to the instruction sheet included with the service compressor.	41 ml²	1.4 oz²
Condenser Replacement	30 ml²	1.0 oz²
Evaporator Replacement	30 ml²	1.0 oz²
Any Line Set (Hose/Tube or Tube Assembly) Replacement	30 ml²	1.0 oz²
Total System Refrigerant Oil Capacity (C24)	230.0 ml	7.8 oz
Total System Refrigerant Oil Capacity (CJ2 with HP9)	200.0 ml	6.8 oz
Total System Refrigerant Oil Capacity (CJ2 without HP9)	140.0 ml	4.7 oz
R-134a
Refrigerant Charge (C24)	1.13 kg	2.5 lb
Refrigerant Charge (CJ2 with HP9)	1.1 kg	2.4 lb
Refrigerant Charge (CJ2 without HP9)	0.66 kg	1.5 lb
R-1234yf
Refrigerant Charge (C24)	1.1 kg	2.4 lb
Refrigerant Charge (CJ2)	0.61 kg	1.3 lb
¹ Abrupt refrigerant loss due to large leak, hose rupture, collision, or pressure relief valve opening. Conditions that allow the refrigerant to seep or bleed off over time do not cause this oil loss. Upon replacement of a component that caused a large refrigerant loss, also add the required amount of oil for the particular component. ² If more than the specified amount of refrigerant oil was drained from a component, add the amount drained.