Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Antilock Brake System (Except Hybrid)) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4255652Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    A small amount of denatured alcohol may be used to ease assembly.

    Brake Pressure Modulator Valve Bracket (1) - Install

  2. GM4255650Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Brake Pressure Modulator Valve Nut (1) - Install and tighten 8 N.m (71 lb in) [2x]

  3. Electronic Brake Control Module Replacement  - Install
scientia non olet · About Mike's Workshop Manuals