Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> Liftgate Handsfree Sensor Malfunction >> Circuit/System Testing

Circuit/System Testing

  1. Ignition/Vehicle Off. Disconnect the X2 harness connector at the K171 Hands-Free Liftgate Sensor Control Module.
  2. Test for 0.3 - 0.8 Ω between the B275A Hands-Free Liftgate Sensor - Upper signal circuit terminal 1 and the signal circuit terminal 2.
    • If less than 0.3 Ω or greater than 0.8 Ω 
    • Replace the B275A Hands-Free Liftgate Sensor - Upper
    • Go to next step: If between 0.3 - 0.8 Ω 
  3. Ignition/Vehicle Off. Disconnect the X3 harness connector at the K171 Hands-Free Liftgate Sensor Control Module.
  4. Test for 0.3 - 0.8 Ω between the B275B Hands-Free Liftgate Sensor-Lower signal circuit terminal 1 and the signal circuit terminal 2.
    • If less than 0.3 Ω or greater than 0.8 Ω 
    • Replace the B275B Hands-Free Liftgate Sensor-Lower
    • Go to next step: If between 0.3 - 0.8 Ω 
  5. Replace the K171 Hands-Free Liftgate Sensor Control Module.
scientia non olet · About Mike's Workshop Manuals