Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC B2494 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Verify the scan tool parameter: Liftgate Handle Switch = Inactive
    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  3. Operate the component: S46B Liftgate Unlatch Switch - Pressed

    Verify the scan tool parameter: Liftgate Handle Switch = Active

    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  4. All OK.
scientia non olet · About Mike's Workshop Manuals