Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Monitoring System >> Diagnostic Information and Procedures >> DTC B392E >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC B392E 39 is not set.
    • If the DTC is set 

      Replace the K180 Driver Monitoring System Control Module

    • Go to next step: If the DTC is not set 
  3. Verify DTC B392E is not set.
  4. All OK.
scientia non olet · About Mike's Workshop Manuals