Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement (LFX) >> Removal Procedure

Removal Procedure

  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Remove Drive Belt. Refer to Drive Belt Replacement
  3. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (With J64)Tire and Wheel Removal and Installation (With J55)
    4. Fig 1: Power Steering Gear Inlet Hose, Bolt And Seals
    GM2773444Courtesy of GENERAL MOTORS COMPANY
  4. Remove Power Steering Gear Inlet Hose Bolt (1)
  5. Remove Power Steering Gear Inlet Hose Seals (2) (Qty: 2)

    DISCARD the seals.

    6. Fig 2: Power Steering Fluid Reservoir Outlet Hose And Clamp
    GM2773446Courtesy of GENERAL MOTORS COMPANY
  6. Disengage Power Steering Fluid Reservoir Outlet Hose Clamp (1)
  7. Remove Power Steering Fluid Reservoir Outlet Hose (2) @ Power Steering Pump
    8. Fig 3: Power Steering Pump And Bolts
    GM2773448Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Access the power steering pump bolts through the holes in the power steering pump pulley.

  8. Remove Power Steering Pump Bolts (1) (Qty: 3)
  9. Remove the power steering pump (2) from the vehicle.
  10. Transfer components as necessary.
scientia non olet · About Mike's Workshop Manuals