Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> XT5 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement (AWD) >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Diesel/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Remove Rear Wheelhouse Liner. Refer to Rear Wheelhouse Liner Replacement
  2. Remove Fuel Tank Filler Pipe Housing. Refer to Fuel Tank Filler Pipe Housing Replacement
    3. Fig 1: Fuel Tank Filler Pipe Tie Strap And Bolt
    GM4317904Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD Tie Strap (1)
  4. Remove Fuel Tank Filler Pipe Bolt (2)
    5. Fig 2: Fuel Tank Filler Pipe Tie Straps And Bolt
    GM4317913Courtesy of GENERAL MOTORS COMPANY
  5. Remove and DISCARD Tie Straps (1) (Qty: 2)
  6. Remove Fuel Tank Filler Pipe Bolt (2)
    7. Fig 3: Fuel Tank Filler Hose, Clamp, Tie Strap And Canister Vent Hose
    GM4317920Courtesy of GENERAL MOTORS COMPANY
  7. Remove and DISCARD Tie Strap (1)
  8. Disconnect Evaporative Emission Canister Vent Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
  9. Remove Fuel Tank Filler Hose Clamp (3)
  10. Remove Fuel Tank Filler Hose (4)
scientia non olet · About Mike's Workshop Manuals