Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC P15A2: Stop/Start Select Switch Circuit Signal >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the scan tool Autostop Disable Reason - Stop/Start Select Switch parameter changes between Yes and No when pressing and releasing the Autostop switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing

    • If the parameter changes 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals