Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the generator (2) into position and tighten the fasteners (1) to 58 N.m (43 lb ft).
CAUTION: Refer to Fastener Caution .
- Connect the engine harness connector (4) and the engine harness battery positive terminal (3) to the generator. Tighten the fastener (2) to 15 N.m (11 lb ft).
- Install the generator B + protective cap (1).
- Install the turbocharger coolant return pipe - bank 1. Refer to Turbocharger Coolant Return Pipe Replacement (LF3 - Bank 2) and Turbocharger Coolant Return Pipe Replacement (LF3 - Bank 1) .
- Install the drive belt. Refer to Drive Belt Replacement (LF3) .
- Install the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Removal and Installation .
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .