Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Antilock Brake System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pressing firmly by hand, install the BPMV bracket until the BPMV assembly is fully seated in the bracket insulators.
  2. Install the BPMV bracket bolt (1) and tighten to 8 N.m (71 lb in).
    Fig 1: BPMV Bracket Bolt
    GM2809430Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  3. Install the BPMV assembly. Refer to Brake Pressure Modulator Valve Replacement .
scientia non olet · About Mike's Workshop Manuals