Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Power Door Lock System And Release Systems) >> Repair Instructions >> Front Side Door Lock Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front side door latch cover (5) to cover the lock.
    Fig 1: View of Door and Wiring Harness Assembly
    GM1920241Courtesy of GENERAL MOTORS COMPANY
  2. Install the screws (4) to the outer edge of the door and to the inside and tighten to 5 N.m (44 lb in).
    CAUTION: Refer to Fastener Caution
  3. Install the screw cover (3).
  4. Connect the electrical connector (2).
  5. Install the wiring harness to the retainers (1).
  6. Install the water deflector.
  7. Install the door trim panel. Refer to Front Side Door Trim Replacement .
scientia non olet · About Mike's Workshop Manuals