Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2016 >> XTS Base >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> DTC B124F: Universal Serial Bus (USB) Programming >> Circuit/System Verification

Circuit/System Verification

  1. Ignition » On / Vehicle » In Service Mode
  2. Verify DTC B124F is not set.
    • If the DTC is set 
    1. Perform all necessary programming and setup procedures for the control module:P16 Instrument Cluster
    2. Verify the DTC does not set.
      • If the DTC sets » Replace the component:P16 Instrument Cluster
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals