Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2016 >> CTS Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the system fuel pressure. Refer to Fuel Pressure Relief .
    WARNING: Refer to Gasoline/Gasoline Vapors Warning .
    WARNING: Refer to Safety Glasses Warning .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Remove the fuel feed pipe (1) from the engine and retainers. Refer to Metal Collar Quick Connect Fitting Service .
    Fig 1: Fuel Feed Pipe
    GM2869964Courtesy of GENERAL MOTORS COMPANY
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (V-Series) and Lifting and Jacking the Vehicle (Base) .
  5. Remove the underbody front air deflector right side. Refer to Underbody Front Air Deflector Replacement - Right Side .
  6. Remove the front body exhaust heat shield right side. Refer to Front Body Exhaust Heat Shield Replacement (Right) .
  7. Disconnect the fuel feed pipe (1) and remove from retainers (2). Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 2: Fuel Feed Pipe Retainers
    GM2815704Courtesy of GENERAL MOTORS COMPANY
  8. Remove the fuel feed pipe (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals