Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2016 >> ATS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> Trunk Release Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition On/Vehicle in Service Mode.
  2. Verify the scan tool Trunk Lid/Liftgate Window Exterior Unlatch Switch parameter changes between Active and Inactive when pressing and releasing the S58A Rear Compartment Lid Unlatch Switch-Exterior.
    • If the parameter does not change 

      Refer to Circuit/System Testing - Exterior Trunk Release Switch Inoperative

    • If the parameter changes 
  3. Verify the scan tool Interior Trunk Lid/Liftgate Window Unlatch Switch parameter changes between Inactive and Active when pressing the S58B Rear Compartment Lid Unlatch Switch-Interior.
    • If the parameter does not change 

      Refer to Circuit/System Testing - Interior Trunk Release Switch Inoperative

    • If the parameter changes 
  4. Verify the M40 Rear Compartment Lid Latch functions when commanding the Trunk Lid Unlatch with a scan tool.
    • If the M40 Rear Compartment Lid Latch does not function 

      Refer to Circuit/System Testing - Release Actuator Inoperative

    • If the M40 Rear Compartment Lid Latch does function 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals