Installation Procedure
- Transfer the rear side door inside handle cable. Refer to Rear Side Door Inside Handle Cable Replacement .
- Transfer the front side door outside handle cable. Refer to Front Side Door Outside Handle Cable Replacement .
- Install the outside handle bracket (1) and the rear side door latch (2) assembly to the vehicle.
- Install the four bolts (1) to the rear side door latch and tighten to 10 N.m (89 lb in).
- Install the rear side door outside handle bracket screw. Refer to Rear Side Door Outside Handle Bracket Replacement .
- Install the rear side door outside handle. Refer to Rear Side Door Outside Handle Replacement .
- Connect the electrical connector to the rear side door outside handle bracket for the luminous reflecting light, if equipped.
- Install the rear side door locking rod. Refer to Rear Side Door Locking Rod Replacement .
- Install the rear side door window rear channel. Refer to Rear Side Door Window Rear Channel Replacement .
- Connect the rear side door latch electrical connector.
- Remove the tape from the rear side door window and frame.
- Inspect the door latch and for proper operation before install the door trim.
- Install the water deflector.
- Install the rear side door trim. Refer to Rear Side Door Trim Replacement .
CAUTION:
Refer to Fastener Caution .
NOTE:
Install and torque the four latch bolts in proper sequence to prevent damage to the latch mechanism.