Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2014 >> ELR >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Front Seat Lane Departure Warning Actuator Replacement

Front Seat Lane Departure Warning Actuator Replacement

Fig 1: Front Seat Lane Departure Warning Actuator
GM3417371Courtesy of GENERAL MOTORS COMPANY
Front Seat Lane Departure Warning Actuator Replacement

Callout Component Name
WARNING:

Refer to SIR Warning .

Preliminary Procedure

  1. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation .
  2. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .
1 Front Seat Lane Departure Warning Actuator Topper Pad (Qty: 2)

Procedure

  1. Gently peel away the topper pad from the seat cushion pad.
  2. When removing the topper pad be careful not to damage the motor.
NOTE:

The topper pad must be replaced every time the motor is replaced.
2 Front Seat Lane Departure Warning Actuator Motor (Qty: 2)

Procedure

  1. Reposition the heater element as needed to gain access to the actuator wire.
  2. Cut the original actuator wire that connects to the main harness and splice in the new actuator wire. Refer to Splicing Copper Wire Using Splice Sleeves
  3. Remove the original actuator and discard it.
  4. Note the routing of the original wire and harness location for installation.
NOTE:

Adjust the splice location so that each splice is at least 40 mm (1.5 in) away from other splices, harness branches, or connectors.
scientia non olet · About Mike's Workshop Manuals