Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2014 >> ELR >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> DTC C0460: Steering Wheel Angle Sensor Module (Distance Sensing Cruise Control) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC C0460 3A is not set.
    • If the DTC is set 
    1. Install the correct part number B99 Steering Wheel Angle Sensor. Clear DTCs and retest.
    2. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
      • If the DTC sets, replace the K14 Distance Sensing Cruise Control Module.
      • If the DTC is not set.
    3. All OK.
    • If the DTC is not set 
  3. All OK.