Installation Procedure
- Install the generator (2) into position and tighten the mounting fasteners (1) to 58 (43 lb ft).
- Connect the engine harness connector (3) and the engine harness battery positive terminal (2) to the generator. Tighten the fastener (1) to 22 (16 lb ft).
- Install the drive belt. Refer to Drive Belt Replacement .
- Install the power brake booster pump. Refer to Power Brake Booster Pump Replacement (LFX) , Power Brake Booster Pump Replacement (LCV, LTG) .
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .