Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2013 >> SRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> Liftgate Object Sensor Malfunction - DTC B153F >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Liftgate Secondary Obstacle Detection parameter is between 3V-3.5V.
    • If between 3V-3.5V 
  3. Verify the scan tool Liftgate Secondary Obstacle Detection parameter is between 3V-3.5V and changes to 2.25-2.75V as the B71R liftgate object sensor - right is pressed.
    • If not between 2.25-2.75V or does not change 

      Test or replace the B71R liftgate object sensor - right.

    • If between 2.25-2.75V and changes 
  4. Verify the scan tool Liftgate Secondary Obstacle Detection parameter is between 3V-3.5V and changes to 2.25-2.75V as the B71L liftgate object sensor - left is pressed.
    • If not between 2.25-2.75V or does not change 

      Test or replace the B71L liftgate object sensor - left.

    • If between 2.25-2.75V and changes 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals