Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2013 >> SRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Adjustable Pedal System >> Diagnostic Information and Procedures >> DTC B3607 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, verify that no other adjustable pedal DTCs are set.
  2. Observe the scan tool Adjustable Pedals Softstop Learn Status parameter. The parameter reading should be learned.
    • If not the specified value, perform the scan tool Learn Adjustable Pedals Softstops procedure. Refer to Adjustable Pedal System Calibration . If the DTC resets, replace the K40 memory seat control module.
scientia non olet · About Mike's Workshop Manuals