Rear Parking Assist Alarm Sensor Replacement

WARNING: This page is about a different car, the 2014 Chevrolet SS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Parking Assist Alarm Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Rear Parking Assist Alarm Sensor Procedure Disconnect the rear parking assist alarm sensor electrical connector. Release the locking tabs on the rear parking assist alarm sensor . The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. NOTE: Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.

Callout

Component Name

Preliminary Procedures
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Rear Parking Assist Alarm Sensor

Procedure

Disconnect the rear parking assist alarm sensor electrical connector.
Release the locking tabs on the rear parking assist alarm sensor .
The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap.

NOTE:

Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.