Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2013 >> ATS 2.5L Eng VIN A, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Programming And Setup - All Systems) >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Replace and Program Control Module or Reprogram Control Module

Replace and Program Control Module or Reprogram Control Module

WARNING: This page is about a different car, the 2014 Chevrolet SS. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing control module, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Ignition ON.
  3. Access the Service Programming System (SPS) and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K43 Power Steering Control Module - Programming and follow the on-screen instructions.
  5. On the SPS Supported Controllers screen, select K43 Power Steering Control Module - Configuration and follow the on-screen instructions.
  6. With a scan tool, Clear All DTCs.
scientia non olet · About Mike's Workshop Manuals